8 sided dice (normal font) Version 2 (zip-Datei)

This is a 3D print file for a 8 sided dice labelled with numbers from 1-8 in 8 normal font. It is used, for example, when practising calculation skills in the lower classes. But there are also some board games, which require such a dice. Printing instructions and tips: Dice - The dice is printed in two parts and then glued together with superglue. This way a better print quality can be achieved. Infill is not necessary for the dice. But I recommand a value of 4-5% for a better rolling behaviour. It is sufficient to print the bottom with only 1-2 layers in order not to change the rolling behavior of the dice too much. Without a closed bottom layer, it is difficult to glue the two halves together. Labels - The plates are arranged flat on the print bed and can all be printed simultaneously. To get the plates to be bicolor at the end, it requires a color change for printers with only one printhead. Instructions for Cura can be found in the Guidelines in Article 5. If you print the first layer with 0.3mm and then each further layer with 0.1mm, you have to set the color change for layer number 14. Take care that the prints do not have an elephant foot!